Selling Vt4.6

[allegfede]

I don't know if this is the right thread, but I need to sell my VT4.6 + VT5 free update + an SX8 breakout box.

The reason is that I bought them on ebay, from a USA toster user.
I believed the board was dual standard (PAL & NTSC), but when installed the devices I found that they are only NTSC.

So I need to sell them to an NTSC user, because the trade-in newtek-europe proposed to me is quite the same of the price of a new VT4.5 live boundle.

Thanks, guys, hope to became soon a VideoToaster happy user. :newtek:

If someone wants to contact me, that is my private email: allegfede@gmail.com

Federico Allegretti

[UnCommonGrafx]

The VT board is dual use: PAL and NTSC.
Go into your preferences to change it.
If you have a REALLY OLD BOARD, what you say is probably the case. But my old board is capable of being switched within a reboot of the system.

As well, it is hoped that you have called NewTek to get more info.
You may want to check again with this info in mind. You may just be a Happy User withing a few hours.

[allegfede]

thanks for your answer.

This is the tread that I posted in the troubleshooting section of this forum: http://www.newtek.com/forums/showthread.php?t=69062

with links to images of my strange board beaviour.

What do you mean for rebooting? I started the machine in pal mode and the Pal output seems buggy suddenly. Did you say to start it up, change to ntsc, reboot, change to pal and then reboot again?

Thanks, for your help.
Federico Allegretti

[allegfede]

I wish to thank NewTek Europe. Probably I solved my VT2 ntsc question.
Thanks for their kindness I'll be soon an Happy Toaster User :) :newtek: